Button Mobile Phone Charm!
Button Mobile Phone Charm
Ingredients
0.6mm Silver Plated Wire
Stopper Bead (we've used a 4mm Sterling Silver Bead but try a Swarovski Crystal for a bit of sparkle)
Tools Required: Round Nose Pliers, Side Cutters
Method
1. Cut a 20cm length of 0.6mm Silver Plated Wire and thread on your stopper bead
2. Put both ends of the wire together and thread on the buttons
3. Use the Round Nose Pliers to make a wire wrapped loop after the last button, and attach it to the mobile phone strap before you close it off.
4. Snip off any excess wire using your side cutters.