Blackcurrant Sorbet Bracelet
Sizzling purple crystals combined with fancy silver plated findings – lovely! Try customising this bracelet project with different coloured crystlas
Ingredients
8 x Silver Plated Fancy 3 Strand Spacing Bars
1 x Silver Plated Fancy Triple Strand Clasp
Beadalon 19 Strand Wire – Bright
6 x Silver Plated Crimp Beads
1 Pack 4mm Blackcurrant AB Bicones 448
1 Pack 4mm Dark Amethyst Bicones 415
1 Pack 4mm Lavender Bicones 434
Additional Tools Required: Chain Nose Pliers, Side Cutters
Method
1. Begin by cutting three lengths of Beadalon Wire each length should be approx 25cm long
2. Next crimp each length of wire to one end of the clasp using your crimp beads and chain nose pliers
3. Next add the crystals in the pattern shown starting with the lavender colour in a 5, 4, 5 pattern i.e. Onto the first piece of wire thread 5 crystals and onto the middle piece of wire thread 4 crystals, onto the bottom piece of wire thread 5 crystals.
4. Next add a spacing bar and move onto the dark amethyst crystals threading them in the 3, 4, 5 crystals pattern shown in the picture.
5. Add another spacing bar and move onto the blackcurrant AB crystals revesing the pattern to 5, 4, 3 crystals.
6. Continue this pattern around the bracelet taking care not to cross over your strands of wire (you will use a total of 8 spacing bars and will have 9 sets of crystal).
7. Finally finish on the blackcurrant AB colour with the same pattern in step 3 (5, 4, 5), crimp onto the remaining side of the clasp and you’re all done – lovely!
