Tribal Bangle - Spoilt Rotten Beads

Tribal Bangle

Tribal Bangle

Inspired by an outfit worn recently by Cheryl Cole…


Silver Plated Memory Wire

8mm Gun Metal Stardust beads x 20

Silver Plated Large Hole Rondelles x 20

Antiqued Copper Large Hole Barrels x 20

8mm Antiqued Copper Stardust Beads x 20

Antiqued Gold Large Hole Rondelles x 20

Tools Required: Round Nose Pliers, Memory Wire Shears


1. Begin by cutting a length of memory wire approx 6 turns long – you won’t need quite this much but its easier to work with too much wire.

2. At one end of the wire use your round nose pliers to create a loop and snip off any excess wire using  your memory wire shears.

3. Next thread all the beads onto the wire using the photograph above as a guide – it’s important to add the stardust beads first and last since these are nice and light and won’t cause the bracelet to open out whilst your wearing it.

4. Finally add another loop to the other end of the wire and cut off the excess using your memory wire shears and you’re done!

Your Cart