Coin Pearl Necklace
46 x Sterling Silver Bali Dot Rondelle Spacer Beads
23 x 4mm Swarovski Crystal Light Colorado Topaz Beads
1 x Sterling Silver Heart Toggle
2 x Sterling Silver 2x2mm Crimp Beads
Beadalon 19 Strand Wire
Additional Tools Required: Crimping Pliers, Professional Micro Shears (they’re great for slicing through Beadalon wire and getting a really neat cut right up against the crimp with no frayed edges!)
1. Take your Professional Micro Shears and begin by cutting a length of Beadalon Wire (approx 22 inches long).
2. On one end of the wire crimp one side of the heart toggle and cut off any excess wire using your Professional Micro Shears.
3. Thread on the beads in the pattern shown
4. Finish by crimping the other side of the heart toggle onto the Beadalon wire and cut off any excess wire.
Tip: It’s easy to make a pair of matching earrings for this necklace – simply thread the beads onto a head pin in the same pattern and create a wire wrapped loop at the top of the headpin, add this onto an ear wire and you’re done!